Wilton JWBS-16B User Manual download pdf (Page 9)

Assembly and Setup

Base Support Extension

1. Attach straps (A, Fig. 1A) to extension base (B,

Fig. 1A) with (2) 5/16-18 button head cap

screws (C, Fig. 1A) and with (2) 5/16 flat

washers (D, Fig. 1A). If needed punch holes

through striping decal. NOTE: Leave screws

slightly loose.

2. Repeat for opposite end of extension base.

3. Insert straps through slits in base of machine

lining up holes in machine base with tapped

holes in strap (Fig 1B)

4. Attach straps to machine base using (2) 5/16-

18 button head Cap screw (E, Fig. 1C) and (2)

5/16 flat washers (F, Fig. 1C).

5. Repeat for opposite end of extension base.

6. Tighten all (8) button head cap screws with the

5 MM hex wrench provided.

7. Attach the handle (C, Fig. 2) to the hand wheel

(D, Fig. 2).

Figure 1A

Figure 1B

Figure 1C

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

No comments

Wilton JWBS-16B User Manual Page 9