Wilton JWBS-16B User Manual download pdf (Page 18)

Electrical Connections

All electrical connections must

be done by a qualified electrician! Failure to

comply may result in loss of property and/or

serious injury!

The JWBS-16B is rated at 1-1/2 HP, 1Ph,

115V/230V, prewired 115V.

The bandsaw comes with a 115V plug (A, Fig. 22).

If you switch the motor to 230V a plug needs to be

purchased for the bandsaw that matches the 230V

outlet you intend to use.

Confirm power at the site is the same as the saw

before making any electrical connections. Review

the wiring diagram on page 30.

Review the Grounding Instructions, 115 Volt

Operation, and 230 Volt Operation sections on

page 7.

Maintenance

Keep blade guides clean and free of build up.

Do not let saw dust build up in the upper and lower

wheel housings. Vacuum out frequently.

Connect the bandsaw to a JET dust collection

system.

Clean and grease the raising/lowering rack for the

upper blade guides if it becomes difficult to raise, or

lower.

Clean, and oil the tensioning mechanism if it

becomes difficult to adjust.

Vacuum out the motor fan cover.

Figure 22

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

No comments

Wilton JWBS-16B User Manual Page 18